© 2019 by 8bits4ever

SX-1 (MSX2+ FPGA)

Mini-ITX FPGA board compatible with the OCM/Zemmix firmware. Includes board backplate (3D printed) and fixing screws.

 

External Cartridge Caddy sold separately. 

 

Attention! This product has a delivery time of about 2-3 days longer than our other products. Please see "Order Guidelines" section to estimate the delivery.

  • PRODUCT INFO

    The SX-1 is a FPGA based computer compatible 100% with the MSX2+ standard. It features VGA/RGB/Composite video output, stereo audio output, PS/2 keyboard input, 2 DB9 joystick ports, 2 USB ports, SD card slot and 2 cartridge slots.

     

    The board has mini-ITX form factor thus it can be host on any modern PC case. Furthermore, the board includes internal pin headers for audio, USB and joystick making it very easy the use of a PC case front/rear panels.

     

    Internally, the SX-1 also features SCC+ sound, FM sound, 2 or 4 MB RAM mapper, and turbo mode (5,37mhz/8,06mhz). The two cartridge slots allow the use of any MSX compatible cartridges. Also each slot can be configured as internal MegaSCC+.

     

    You can connect any PS/2 keyboard (or USB keyboard if implement PS/2 protocol through USB) and MSX compatible joysticks (DB9). The unit also includes a SD slot that can be used as mass storage device through BASIC or MSXDOS command line.

     

    In addition an optional external cartridge caddy/extension can be connected to have the cartridge slots outside the case. The caddy comes in a 3D printed case and includes ribbon cables and fixing screws.

     

    Attention! It does not includes the case

  • TECH SPECS

    • Altera Cyclone EP1C12Q240C8N FPGA
    • 32Mb SRAM
    • 2x standard MSX Cartridge Slot Connectors
    • 1x microSD Card Slot 
    • D-Sub 15 VGA/RGB video output w/scanlines generator.
    • RCA composite video output
    • 3.5mm jack stereo audio output
    • PS2 Keyboard port
    • 2 DB9 joysticks ports
    • Extensible cartridge slots
    • Compatible with KdL firmware
    • Includes 3D printed backplate
  • RETURN AND REFUND POLICY

    In order to get a replacement or refund defective units must first be returned. Once the item has been inspected we will proceed to replace the unit or refund the payment. Items that have been damaged by careless/unadecuated use or modifyied by the buyer in any way will not be elegible for replace or refund of any kind. 

     

    The unit ships with the lastest stable firmware/core available. Notice that if you accidentally brick the unit by wrongly updating/downgrading the firmware/core, we do not give tech support for the reflashing process. If you want to keep your board under warranty you should send it back to us for review/reflashing.

€130.00Price
0