© 2019 by 8bits4ever

TF530 Accelerator (Amiga 500)

The TF530 Accelerator revision 3, for Amiga 500 computers. Complete kit

  • PRODUCT INFO

    The TF530 designed by S.J. Leary (TerribleFire), features a Motorola MC68030 CPU, a MC68882 FPU, 2MB Fast RAM and a 40 pin IDE connector. The 2MB Fast RAM comes very handy when running WHDLoad games.

     

    The board comes with a MC68030RP33 CPU clocked at 40Mhz 

    running almost 6 times faster than the original Amiga CPU.

     

    The pack also includes the relocator board, a CF-IDE adapter and a cooler kit (30mm fan, fan holder and fixing screws). The cooler installation is not required to run but recommended.

     

    These units have been extensively tested on A500 Rev 5, Rev 6A and Rev 8a1. To ensure stability is recommended to use original Amiga PSU (3/4.5 Amps). Operation under A1000 and A2000 machines are not tested therefore we cannot guarantee the board will work on those machines.

     

    Attention! IDE operation requires a pin to be soldered on the Amiga board and Kickstart 2.06 or higher installed. Rev 6 boards might require RP106 and RP107 network resistors to be soldered.

  • TECH SPECS

    -MC68030RP33 CPU @ 40Mhz.

    -MC68882FN40 FPU 

    -2MB fast RAM. 

    -40 pin IDE port (unbuffered, A600 compatible).

    -CPU relocator board included.

    -3mm cooler fan kit included.

    -CF-IDE adapter Included.

    -Power cable and INT2 jumper included.

    -PDF Installation guide included (downloadable)

     

     

     

  • RETURN AND REFUND POLICY

    In order to get a replacement or refund defective units must first be returned. Once the item has been inspected we will proceed to replace the unit or refund the payment. Items that have been damaged by careless/unadecuated use or modifyied by the buyer in any way will not be elegible for replace or refund of any kind. 

     

    The unit ships with the lastest stable firmware available. Notice that if you accidentally brick the unit by wrongly updating/downgrading the firmware, we do not give tech support for the reflashing process. If you want to keep your board under warranty you should send it back to us for review/reflashing.

€120.00Price
0