TF534 Accelerator (Amiga 500)

TF534 Accelerator (Amiga 500)

SKU: TF 534

The TF534 Accelerator revision 2c for Amiga 500 computers.


Excellent to get WHDLoad running on your A500. Includes main accelerator board, relocator board and CPU passive heatsink


Might be possible to get it running on Atari ST computers:


    The TF534 designed by S.J. Leary (TerribleFire), features a Motorola MC68030 CPU, a MC68882 FPU, 4MB Fast RAM and a 44 pin IDE connector. 

    The board comes with a MC68030RP33 CPU clocked at 40Mhz running almost 6 times faster than the original Amiga CPU.

    These units have been extensively tested on A500 Rev 5, Rev 6A and Rev 8a1. To ensure stability is recommended to use original Amiga PSU (3/4.5 Amps). Operation under A1000 and A2000 machines are not tested therefore we cannot guarantee the board will work on those machines.

    Attention! IDE operation requires Kickstart 2.06 or higher installed. Amiga Rev 6 boards might require RP106 and RP107 network resistors to be soldered.


    • MC68030RP33 CPU @ 40Mhz (installed on a socket, upgradable). Includes heatsink.
    • MC68882FN40 FPU 
    • 4MB fast RAM. 
    • 44 pin IDE port (2mm pitch, buffered, A600 compatible).
    • CPU relocator board included.
    • Downloadable installation guide




    In order to get a replacement or refund defective units must first be returned. Once the item has been inspected we will proceed to replace the unit or refund the payment. Items that have been damaged by careless/unadecuated use or modifyied by the buyer in any way will not be elegible for replace or refund of any kind. 


    The unit ships with the lastest stable firmware available. Notice that if you accidentally brick the unit by wrongly updating/downgrading the firmware, we do not give tech support for the reflashing process. If you want to keep your board under warranty you should send it back to us for review/reflashing.