Emu-FDC R3

The Emu-FDC integrates a floppy dIsk controller and a disk emulator into a single cartridge. The emulator can read floppy disk images from a SD card and mount them so the system can access them as real floppy disks. 

 

The Emu-FDC is compatible with MSXDOS (MSXDOS requires at least 64k ram to run) and contains Disk BASIC v1.1 in ROM. It works in MSX/MSX2/MSX2+/Turbo-R machines.

 

Attention: In machines with internal disk drives some disk images can refuse to load due incompatible drive enumeration. You might need to disable the internal drive/controller so the EmuFDC is seen as unit 0

 

• Disk emulator running FlashFloppy firmware 
• 1x MicroSD slot
• Internal 0.91" 128x32 OLED display
• Control buttons (<<, >>, Select)
• DD/DS support (360k or 720k per disk image)
• Runs Disk Basic 1.1. MSXDOS compatible. 
• MSX1, MSX2, MSX2+ and TurboR compatible

 

Attention: Requires at least 64k RAM to load MSXDOS. Machines with internal floppy drives might need those drives to be disconnected or disabled for the Emu-FDC to be seen as drive "A:"

 

In order to get a replacement or refund defective units must first be returned. Once the item has been inspected we will proceed to replace the unit or refund the payment. Items that have been damaged by careless/unadecuated use or modifyied by the buyer in any way will not be elegible for replace or refund of any kind.