From the moment of purchase, this product takes about 6 weeks to get built, tested and be ready for shipping.
Re-issue of our SX-2 MSX FPGA. 2nd Gen MSX FPGA compatible with KdL 3.9.2 new firmware release.
SX-2 MSX2+ FPGA
The SX-2 was one of the first 2nd-generation MSX FPGA systems to come out. It is built around an Altera Cyclone IV with 22K logic cells—nearly twice as many as the older Cyclone I used in the original OneChipMSX, Zemmix, and SX-1 boards.
The SX-2 operates as an MSX2+ machine and is fully compatible with the latest recently released KdL's 3.9.2 OCM-PLD firmware.
We’ve decided to reissue the SX-2, retaining all of its original features (with the exception of the third slot) and introducing a new enclosure that aligns with the design of our latest MSX FPGA systems.
- Altera Cyclone EP4CE22F17 FPGA (22K cells)
- 32MB SDRAM
- 2x expansion slots
- 1x microSD card slot (FAT-16 support only)
- D-Sub 15 VGA/RGB video output w/ scanline generator
- Internal PSG, SCC+, OPLL (YM2413), OPL (YM3526), OPL2 (YM3812) and OPL3 (YMF262).
- 3.5mm jack stereo audio output
- 3.5mm jack tape in/out
- PS2 keyboard port
- PS2 mouse port (emulates MSX mouse on joystick port 1)
- 2x DB9 joystick port (MSX standard)
- DC barrel type power socket
- MIDI out (through joystick 2 port)
- 2/4 MB RAM mapperInternal
- 1MB MEGASCC+/MegaRAM2
- Turbo CPU modes: 5.37 or 8.06 MHzDual BIOS
- Fully assembled in a 3D printed case
Attention! Power supply and power cable are not included. The unit requires at least 1.5 amps output, high quality power supply and shielded USB power cable. 3D printed cases might show imperfections
In order to get a replacement or refund defective units must first be returned. Once the item has been inspected we will proceed to replace the unit or refund the payment. Items that have been damaged by careless/unadecuated use or modifyied by the buyer in any way will not be elegible for replace or refund of any kind.
The unit ships with the lastest stable firmware/core available. Notice that if you accidentally brick the unit by wrongly updating/downgrading the firmware/core, we do not give tech support for the reflashing process. If you want to keep your unit under warranty you should send it back to us for review/reflashing.
